Availability : Approx. Delivery Lead Time : 8-10 Weeks
Product Description
DME PROLINK’s 1-Core Indoor Drop Fiber cable is designed and manufactured to the highest standards. Available as Single-mode (G.657A2 compliant), it provides the bend-insensitivity and robustness essential to a successful FTTx deployment The Steel wire strength member offers more than adequate strength to pull long lengths of this cable. The Fiber used in DME PROLINK’s Fiber Optic cables, are made of pure silica and germanium doped silica. A UV curable acrylate material is applied over the Fiber Cladding as primary protective coating. DME PROLINK quality personals ensures product reliability through rigorous qualification testing to assure cable performance and durability in adverse field environments. Excellent quality control is achieved through intense in-house quality check and stringent audit acceptance by ISO 9001.
The Fiber within FO Drop cable are designed, Manufactured and tested according to below standards:
• IEC 60793-1: Optical Fiber Part 1: Generic Specification
• IEC 60793-2: Optical Fiber Part 2: Product Specification
• IEC 60794-2: Optical Fiber Cables Part 2 Indoor cables- Sectional Specification
• ITU-T G650: Definition and test methods for the relevant parameters of single-mode fibers
• ITU-T G.655: Characteristics of a non-zero dispersion-shifted single-mode optical fiber and cable
• ITU-T G.657: Characteristics of a bending-loss insensitive single-mode optical fiber
Category
Description
Values
Before Cabling
After Cabling
Optical
Specifications
Attenuation @1310 nm
≤0.35 dB/km
≤0.40 dB/km
Attenuation @1550 nm
≤0.21 dB/km
≤0.30 dB/km
Zero Dispersion Slope
≤0.092 ps/nm²∙km
Zero Dispersion Wavelength
1300 – 1324 nm
Cable Cutoff Wavelength (λcc)
≤1260 nm
Macro bending Loss
(10 turns; Ф30 mm) @1550 nm
≤ 0.03 dB
(10 turns; Ф30 mm) @1625 nm
≤ 0.10dB
(1 turn; Ф20 mm) @1550 nm
≤ 0.10 dB
(1 turn; Ф20 mm) @1625 nm
≤ 0.20 dB
1 turn; Ф15 mm) @1550 nm
≤ 0.50 dB
(1 turn; Ф15 mm) @1625 nm
≤ 1.00 dB
Mode Field Diameter @1310 nm
8.6 ± 0.4μm
Dimensional
Specifications
Cladding Diameter
125 ±1μm
Cladding non circularity
≤1.0%
Coating diameter
245 ± 7μm
Coating non circularity
≤ 6%
Cladding / coating concentricity error
≤ 6μm
Core/clad concentricity error
≤0.6μm
Mechanical
Specifications
Proof stress
≥1.05%
Environmental
Specification
Operation temperature range
-20℃ to + 60℃
Installation temperature range
-20℃ to + 60℃
Transport and storage temperature range
-20℃ to + 60℃
Physical
Fiber count
4 G.657A2
Tight buffer fiber diameter
0.9mm ± 50μm
Strength member
Steel Wire
Cable OD
(2.0*3.0mm) ± 5%
Cable weight
10 kg/km ± 15%
Mechanical
Max. tensile load
Min. 220N
Crush resistance
1000N/100mm
Minimal installation bending radius
30mm
Minimal operation bending radius
15mm
Part Number
D1149-ID177A2WT-S
Product Description
Fiber Optic Indoor Drop Cable, 1 Core, Single-mode OS2, LSZH, G.657A2, White with Steel Strength Member
DME PROLINK’s 1-Core Indoor Drop Fiber cable is designed and manufactured to the highest standards. Available as Single-mode (G.657A2 compliant), it provides the bend-insensitivity and robustness essential to a successful FTTx deployment The Steel wire strength member offers more than adequate strength to pull long lengths of this cable. The Fiber used in DME PROLINK’s Fiber Optic cables, are made of pure silica and germanium doped silica. A UV curable acrylate material is applied over the Fiber Cladding as primary protective coating. DME PROLINK quality personals ensures product reliability through rigorous qualification testing to assure cable performance and durability in adverse field environments. Excellent quality control is achieved through intense in-house quality check and stringent audit acceptance by ISO 9001.
