PART NUMBER : D0313-C6FF-S
Keystone Jack, Shuttered, Unshielded, CAT6, Flush-mount, F-Tool Compatible
• Meets all requirements specified in ANSI/TIA-568.2-D CAT6 connecting hardware requirements
• Snap in style keystone jack; Fire Retardant Grade: UL-94V-0
• Comes with Shutter
• The termination field is on the rear of the jack for easy access.
• Can accommodate Conductor diameter in the range 0.5-0.65mm (AWG 22-24).
• Connector wiring is universal and has installation color codes for both T568A and T568B wires schemes.
• 25 Years System Warranty
Datasheet
Availability :DME PROLINK’s Shuttered Keystone Jacks RJ45 are designed to be used with all DME PROLINK compatible products. The jack is designed in such a way that it comes with self closing shutter which protects the jack from Dust ingress. This includes unique pair separation towers allowing for quicker and easier termination. The connector is configured in a 180° configuration such that the punch field is on the rear of the jack, allowing for rear termination. DME PROLINK System components meet or exceed the requirements for channel and component level performance for the TIA/EIA Category and cUL(us) Listed. Compatible with DME PROLINK’s Special Termination Tool called F-Tool.
Meets all requirements specified in ANSI/TIA-568.2-D CAT6 connecting hardware requirements
ELECTRICAL | |
Electrical Insulation Resistance | 500 MΩ min. @ 100V DC |
Dielectric Withstanding Voltage | 1000V DC or AC Peak Contact to Contact @ 60Hz for 1 minute |
MECHNICAL | |
Insertion / Extraction Life | 750 Cycles Minimum |
IDC Wire Gauge | 22~24 AWG |
PHYSICAL | |
Housing | High-impact, Flame Retardant Plastic, UL 94V-0 |
Spring Wire | Phosphor Bronze Alloy Plated with 50 micro-inch of gold |
IDC | Phosphor Bronze Alloy with 100 micro-inch 100% Sn Alloy |
D0313-C6FF-S
Keystone Jack, Shuttered, Unshielded, CAT6, Flush-mount, F-Tool Compatible
DME PROLINK’s Shuttered Keystone Jacks RJ45 are designed to be used with all DME PROLINK compatible products. The jack is designed in such a way that it comes with self closing shutter which protects the jack from Dust ingress. This includes unique pair separation towers allowing for quicker and easier termination. The connector is configured in a 180° configuration such that the punch field is on the rear of the jack, allowing for rear termination. DME PROLINK System components meet or exceed the requirements for channel and component level performance for the TIA/EIA Category and cUL(us) Listed. Compatible with DME PROLINK’s Special Termination Tool called F-Tool.
Meets all requirements specified in ANSI/TIA-568.2-D CAT6 connecting hardware requirements
ELECTRICAL | |
Electrical Insulation Resistance | 500 MΩ min. @ 100V DC |
Dielectric Withstanding Voltage | 1000V DC or AC Peak Contact to Contact @ 60Hz for 1 minute |
MECHNICAL | |
Insertion / Extraction Life | 750 Cycles Minimum |
IDC Wire Gauge | 22~24 AWG |
PHYSICAL | |
Housing | High-impact, Flame Retardant Plastic, UL 94V-0 |
Spring Wire | Phosphor Bronze Alloy Plated with 50 micro-inch of gold |
IDC | Phosphor Bronze Alloy with 100 micro-inch 100% Sn Alloy |
D0313-C6FF-S
Keystone Jack, Shuttered, Unshielded, CAT6, Flush-mount, F-Tool Compatible
DME Prolink is the data communication division of ECS global Wire and Cable, that delivers high performance converged datacom solutions. We manufacture complete end-to-end intelligent structured cabling and data center solutions.
Introducing DME Prolink Patch Free FDH. Most ideal solution for connecting premises Fiber optic cables with Telco Fiber Access Network through inbuilt GPON Splitters. Approved by Etisalat. IN STOCK. #GPONSolutions #DMEProlink #FTTx
Electrical Cable Supply Ltd (DME PROLINK),
3135 – 6900 Graybar Road, Richmond,
BC V6W 0A5 Canada
Phone: +1 604 276 9913
Fax: +1 604 276 9915
ECS Global Wire & Cable FZCO (DME PROLINK),
Jebel Ali Free Zone, South Side,
PO Box. 17159, Dubai UAE
Phone: +971 4 811 8000
Fax: +971 4 880 9361