PART NUMBER : D0233-SH1LSGY
Copper Patch Lead, CAT6A, Shielded, 1m, LSZH, Grey
• Meets all requirements specified in ANSI/TIA-568.2-D
• Low Smoke Zero Halogen
• Stranded cores for enhanced flexibility
• Performance exceeding Category 6A specifications of 500MHz
• Snag-less Plug Design
• Available in various lengths and colors
• Cable Termination as per T568B wire scheme on both ends.
• Fully interoperable and backwards compatible
• UL Listed and ETL Verified
• 25 Years System Warranty
Datasheet
Availability : In StockDME PROLINK’s Category 6A Copper Patch Leads are designed for optimal performance and manageability. Our Patch Leads are designed to offer a slim profile specifically for today’s high-density environments. Snag-less plug design makes these Patch Leads an excellent choice in environments where moves, adds and changes (MAC’s) are frequent.
Meet CAT6A Channel Requirements Specified in ANSI/TIA-568.2-D
TRANSMISSION PERFROMANCE | |
Meet CAT6A Channel Requirements Specified in ANSI/TIA-568.2-D | |
ELECTRICAL | |
Electrical Insulation Resistance | 500MΩ min. @ 100 V d.c |
Dielectric Withstanding Voltage | 1000V DC or AC Peak contact to contact 1500V DC or AC Peak contact to test panel |
MECHNICAL | |
Insertion / Extraction Life | e 750 Cycles Minimum |
Tensile Strength | ≥ 20N per Wire |
PHYSICAL | |
Plug | |
Assembly | Compatible with FCC Part 68 Subpart F |
Housing | UL Listed 94V-0 Flame-Retardant PC (Polycarbonate) |
IDC Blades | Phosphor Bronze. Contact area of blades is plated with 50 micro- inches of hard gold over 100 micro-inches of Nickel |
Shield | Brass alloy plated with 100 micro inch of Nickel |
Cordage | |
Jacket Dimension | Diameter <0.25 inches / OD. 6.0 ± 0.2mm |
Construction | CAT6A FTP 26 AWG 7 stranded 4-Pair Copper wireconductor. High Density Polyethylene Insulation Material. Low Smoke Zero Halogen Jacket. |
Part Number
D0233-SH1LSGY : Copper Patch Lead, CAT6A, Shielded, 1m, LSZH, Grey
D0233-SH2LSGY : Copper Patch Lead, CAT6A, Shielded, 2m, LSZH, Grey
D0233-SH3LSGY : Copper Patch Lead, CAT6A, Shielded, 3m, LSZH, Grey
D0233-SH5LSGY : Copper Patch Lead, CAT6A, Shielded, 5m, LSZH, Grey
DME PROLINK’s Category 6A Copper Patch Leads are designed for optimal performance and manageability. Our Patch Leads are designed to offer a slim profile specifically for today’s high-density environments. Snag-less plug design makes these Patch Leads an excellent choice in environments where moves, adds and changes (MAC’s) are frequent.
Meet CAT6A Channel Requirements Specified in ANSI/TIA-568.2-D
TRANSMISSION PERFROMANCE | |
Meet CAT6A Channel Requirements Specified in ANSI/TIA-568.2-D | |
ELECTRICAL | |
Electrical Insulation Resistance | 500MΩ min. @ 100 V d.c |
Dielectric Withstanding Voltage | 1000V DC or AC Peak contact to contact 1500V DC or AC Peak contact to test panel |
MECHNICAL | |
Insertion / Extraction Life | e 750 Cycles Minimum |
Tensile Strength | ≥ 20N per Wire |
PHYSICAL | |
Plug | |
Assembly | Compatible with FCC Part 68 Subpart F |
Housing | UL Listed 94V-0 Flame-Retardant PC (Polycarbonate) |
IDC Blades | Phosphor Bronze. Contact area of blades is plated with 50 micro- inches of hard gold over 100 micro-inches of Nickel |
Shield | Brass alloy plated with 100 micro inch of Nickel |
Cordage | |
Jacket Dimension | Diameter <0.25 inches / OD. 6.0 ± 0.2mm |
Construction | CAT6A FTP 26 AWG 7 stranded 4-Pair Copper wireconductor. High Density Polyethylene Insulation Material. Low Smoke Zero Halogen Jacket. |
Part Number
D0233-SH1LSGY : Copper Patch Lead, CAT6A, Shielded, 1m, LSZH, Grey
D0233-SH2LSGY : Copper Patch Lead, CAT6A, Shielded, 2m, LSZH, Grey
D0233-SH3LSGY : Copper Patch Lead, CAT6A, Shielded, 3m, LSZH, Grey
D0233-SH5LSGY : Copper Patch Lead, CAT6A, Shielded, 5m, LSZH, Grey
DME Prolink is the data communication division of ECS global Wire and Cable, that delivers high performance converged datacom solutions. We manufacture complete end-to-end intelligent structured cabling and data center solutions.
Introducing DME Prolink Patch Free FDH. Most ideal solution for connecting premises Fiber optic cables with Telco Fiber Access Network through inbuilt GPON Splitters. Approved by Etisalat. IN STOCK. #GPONSolutions #DMEProlink #FTTx
Electrical Cable Supply Ltd (DME PROLINK),
3135 – 6900 Graybar Road, Richmond,
BC V6W 0A5 Canada
Phone: +1 604 276 9913
Fax: +1 604 276 9915
ECS Global Wire & Cable FZCO (DME PROLINK),
Jebel Ali Free Zone, South Side,
PO Box. 17159, Dubai UAE
Phone: +971 4 811 8000
Fax: +971 4 880 9361