PART NUMBER : D0204-SF3LSVT
Horizontal Cable, CAT 7A, S/FTP, 305m, LSZH Sheath, 0.56mm, Violet
• Enhanced Performance meeting Category 7A specifications up to 1000 MHz
• Performance compliance to ISO/IEC 11801
• Third Party verification from ETL Intertek
• 0.56mm, Solid Bare Copper
• Low Smoke Zero Halogen
• Flame Test: IEC 60332-1, IEC60332-3C, CMX
• 25 Years System Warranty
Datasheet
Availability :DME PROLINK’s Category 7A S/FTP cables are manufactured and tested to ISO/ IEC 11801 2nd Ed. In Amendment 1 & 2 Category 7A specifications. DME PROLINK’s Category 7A S/FTP cable is designed for optimal support of High-Speed data protocols delivering 10 Gbps t0 40 Gbps performance to the workstation. Each cable consists of 8 colour coded 0.56mm polyolefin Foam-Skin insulated conductors. Each conductors are twisted together to form 4 pairs with varying lengths. Each pairs are then wrapped with Aluminium/ Polyester foil. Then an overall braid wrapped around all pairs. DME PROLINK’s CAT7A cable is designed for quick and easy installation where no special tools are required. CAT7A cable is supplied in 305m Drums.
• ISO/IEC 11801:2011 (Ed.2.2)
• IEC 61156-5:2012 (Ed.2.1)
• EN 50288-4
• YD/T1019
• EC 60332-1-2
• IEC 60754-[1,2]
• IEC 61034-[1,2]
Overall Diameter (mm) | 7.8 ± 0.5mm |
Sheath Surface | Clean, Frap, Satiation |
Sheath Thickness | 0.55 ± 0.05mm |
Insulation Material | Skin Foam Skin PE |
Insulation Diameter | 1.330 ± 0.05mm |
Conductor Diameter (mm) | 0.56 (± 0.005) |
Conductor Material | Solid Bare Copper |
Inner Screening Material | Aluminum Foil |
Outer Screening Material | Tinned Copper 0.10mm. Coverage ≥40% |
Rip-cord | Yes |
Mean Input Impedance (Ω) @ 1-1000 MHz | 100 ± 25 Ω |
Delay Skew (ns/100m) | ≤ 25 |
Max. DC Resistance (Ω/100m) @ 20°C | 9.5 |
DC Conductor Resistance Unbalance (%) max | 2.0 |
Unbalanced-To-Ground Capacitance (pF/100m) Max. | 330 |
Nominal Velocity of Propagation (NVP) | 74% |
Drain Wire | No |
Max. Pulling Force (N) | 100 |
Min. Bend Radius during Installation | 8xD (Overall diameter) |
Min. Bend Radius after Installed | 4xD (Overall diameter) |
Installation Temperature Range | ‐30°C to +50°C |
Operating Temperature Range | ‐20°C to +70°C |
Packing Length (Meters) | 305 ± 1.0m |
• 10G BASE-T
• 1.2 Gbps ATM
• 1000BASE-T (Gigabit Ethernet)
• 155/662 Mbps ATM
• 100BASE-T (IEEE 802.3)
• 100 Mbps TP-PMD (ANSI X3T9.5)
• 100BASE-VG-AnyLAN
• 4/16 Mbps TOKEN RING (IEEE 802.5)
• 10BASE-T (IEEE 802.3)
D0204-SF3LSVT
Horizontal Cable, CAT 7A, S/FTP, 305m, LSZH Sheath, 0.56mm, Violet
DME PROLINK’s Category 7A S/FTP cables are manufactured and tested to ISO/ IEC 11801 2nd Ed. In Amendment 1 & 2 Category 7A specifications. DME PROLINK’s Category 7A S/FTP cable is designed for optimal support of High-Speed data protocols delivering 10 Gbps t0 40 Gbps performance to the workstation. Each cable consists of 8 colour coded 0.56mm polyolefin Foam-Skin insulated conductors. Each conductors are twisted together to form 4 pairs with varying lengths. Each pairs are then wrapped with Aluminium/ Polyester foil. Then an overall braid wrapped around all pairs. DME PROLINK’s CAT7A cable is designed for quick and easy installation where no special tools are required. CAT7A cable is supplied in 305m Drums.
• ISO/IEC 11801:2011 (Ed.2.2)
• IEC 61156-5:2012 (Ed.2.1)
• EN 50288-4
• YD/T1019
• EC 60332-1-2
• IEC 60754-[1,2]
• IEC 61034-[1,2]
Overall Diameter (mm) | 7.8 ± 0.5mm |
Sheath Surface | Clean, Frap, Satiation |
Sheath Thickness | 0.55 ± 0.05mm |
Insulation Material | Skin Foam Skin PE |
Insulation Diameter | 1.330 ± 0.05mm |
Conductor Diameter (mm) | 0.56 (± 0.005) |
Conductor Material | Solid Bare Copper |
Inner Screening Material | Aluminum Foil |
Outer Screening Material | Tinned Copper 0.10mm. Coverage ≥40% |
Rip-cord | Yes |
Mean Input Impedance (Ω) @ 1-1000 MHz | 100 ± 25 Ω |
Delay Skew (ns/100m) | ≤ 25 |
Max. DC Resistance (Ω/100m) @ 20°C | 9.5 |
DC Conductor Resistance Unbalance (%) max | 2.0 |
Unbalanced-To-Ground Capacitance (pF/100m) Max. | 330 |
Nominal Velocity of Propagation (NVP) | 74% |
Drain Wire | No |
Max. Pulling Force (N) | 100 |
Min. Bend Radius during Installation | 8xD (Overall diameter) |
Min. Bend Radius after Installed | 4xD (Overall diameter) |
Installation Temperature Range | ‐30°C to +50°C |
Operating Temperature Range | ‐20°C to +70°C |
Packing Length (Meters) | 305 ± 1.0m |
• 10G BASE-T
• 1.2 Gbps ATM
• 1000BASE-T (Gigabit Ethernet)
• 155/662 Mbps ATM
• 100BASE-T (IEEE 802.3)
• 100 Mbps TP-PMD (ANSI X3T9.5)
• 100BASE-VG-AnyLAN
• 4/16 Mbps TOKEN RING (IEEE 802.5)
• 10BASE-T (IEEE 802.3)
D0204-SF3LSVT
Horizontal Cable, CAT 7A, S/FTP, 305m, LSZH Sheath, 0.56mm, Violet
DME Prolink is the data communication division of ECS global Wire and Cable, that delivers high performance converged datacom solutions. We manufacture complete end-to-end intelligent structured cabling and data center solutions.
Introducing DME Prolink Patch Free FDH. Most ideal solution for connecting premises Fiber optic cables with Telco Fiber Access Network through inbuilt GPON Splitters. Approved by Etisalat. IN STOCK. #GPONSolutions #DMEProlink #FTTx
Electrical Cable Supply Ltd (DME PROLINK),
3135 – 6900 Graybar Road, Richmond,
BC V6W 0A5 Canada
Phone: +1 604 276 9913
Fax: +1 604 276 9915
ECS Global Wire & Cable FZCO (DME PROLINK),
Jebel Ali Free Zone, South Side,
PO Box. 17159, Dubai UAE
Phone: +971 4 811 8000
Fax: +971 4 880 9361