PART NUMBER : D01715-FU3LSGY
• Performance exceeding Category 6 specifications of 250MHz
• Performance compliance to ISO/IEC 11801, ANSI/TIA-568-C.2 and YD/T 1019
• AWG 24, Solid Bare Copper
• Low Smoke Zero Halogen
• Fire rated to IEC 60332-1
• 25 Years System Warranty
Datasheet
Availability : 100 Rolls in StockDME PROLINK’s Category 6 F/UTP cables are manufactured and tested to the ANSI/TIA 568‐C.2, EN50173‐1 and ISO/ IEC 11801 Ed. 2.0 Category 6 specifications. DME PROLINK’s Category 6 F/UTP cable is designed for optimal support of High-Speed data protocols delivering 1 Gbps performance to the workstation. Each cable consists of 8 colour coded 24AWG polyethylene insulated conductors. Each conductors are twisted together to form 4 pairs with varying lengths. These pairs are then put around a central ‘X’ shaped polyethylene filler/Separator which helps in maintaining and enhancing the cable
performance. There is an overall Aluminum/Polyester foil around the pairs. DME PROLINK’s CAT6 cable is designed for quick and easy installation where no special tools are required.
• ISO/IEC 11801:2011 (Ed.2.2)
• ANSI/TIA-568-C.2:2009
• IEC 61156-5:2012 (Ed.2.1)
• EN 50173-1:2011; EN 50173-2:2007 including amendment A1:2010
• EN 50288-6-1:2013
• IEC 60332-1 – [1,2]:2004
• IEC 60754-[1,2]
• IEC 61034-[1,2]
• 10G BASE-T (Length <50m)
• 1000BASE-T (Gigabit Ethernet)
• 100BASE-T (IEEE 802.3)
• 100BASE-VG-AnyLAN
• 100 Mbps TP-PMD (ANSI X3T9.5)
• 10BASE-T (IEEE 802.3)
• 1.2 Gbps ATM
• 55/155 Mbps ATM
• 4/16 Mbps TOKEN RING (IEEE 802.5)
Overall Diameter (mm) | 6.5 ± 0.3 |
Sheath Thickness (mm) | 0.60 ± 0.05 |
Sheath Surface | Clean, Frap, Satiation |
Insulation Material | HDPE |
Insulation Overall diameter (mm) | 1.04 ± 0.03 |
Screening Material | Aluminum / Polyester Foil |
Conductor Diameter (mm) | 0.52 (± 0.005) |
Conductor Material | Solid Bare Copper |
Impedance (Ω) @ 1-250 MHz 100 | ± 15 Ω |
Delay Skew (ns/100m) @ 1-250 MHz | ≤ 45 |
Max. DC Resistance (Ω/100m) | 9.38 |
Max. DC Conductor Resistance Unbalance | (%) 5.0 |
Mutual Capacitance (nF/100m) | < 5.6 |
Capacitance Unbalance (pF/100m) | 330 |
Nominal Velocity of Propagation (NVP) | 68% |
Rip cord | Yes |
Drain Wire | Yes |
Max. Pulling Force (KG) | 11.5 |
Min. Bend Radius during Installation 8xD (Overall diameter) at | ‐20°C to ±1°C |
Min. Bend Radius after Installed | 4xD (Overall diameter) |
Installation Temperature Range | 0°C to +50°C |
Operating Temperature Range | ‐20°C to +70°C |
Packing Length (Meters) 305 | ± 1.5 |
D01715-FU3LSGY
Horizontal Cable, Cat-6, F/UTP, 305m, LSZH Sheath, AWG 24, Grey
DME PROLINK’s Category 6 F/UTP cables are manufactured and tested to the ANSI/TIA 568‐C.2, EN50173‐1 and ISO/ IEC 11801 Ed. 2.0 Category 6 specifications. DME PROLINK’s Category 6 F/UTP cable is designed for optimal support of High-Speed data protocols delivering 1 Gbps performance to the workstation. Each cable consists of 8 colour coded 24AWG polyethylene insulated conductors. Each conductors are twisted together to form 4 pairs with varying lengths. These pairs are then put around a central ‘X’ shaped polyethylene filler/Separator which helps in maintaining and enhancing the cable
performance. There is an overall Aluminum/Polyester foil around the pairs. DME PROLINK’s CAT6 cable is designed for quick and easy installation where no special tools are required.
• ISO/IEC 11801:2011 (Ed.2.2)
• ANSI/TIA-568-C.2:2009
• IEC 61156-5:2012 (Ed.2.1)
• EN 50173-1:2011; EN 50173-2:2007 including amendment A1:2010
• EN 50288-6-1:2013
• IEC 60332-1 – [1,2]:2004
• IEC 60754-[1,2]
• IEC 61034-[1,2]
Overall Diameter (mm) | 6.5 ± 0.3 |
Sheath Thickness (mm) | 0.60 ± 0.05 |
Sheath Surface | Clean, Frap, Satiation |
Insulation Material | HDPE |
Insulation Overall diameter (mm) | 1.04 ± 0.03 |
Screening Material | Aluminum / Polyester Foil |
Conductor Diameter (mm) | 0.52 (± 0.005) |
Conductor Material | Solid Bare Copper |
Impedance (Ω) @ 1-250 MHz 100 | ± 15 Ω |
Delay Skew (ns/100m) @ 1-250 MHz | ≤ 45 |
Max. DC Resistance (Ω/100m) | 9.38 |
Max. DC Conductor Resistance Unbalance | (%) 5.0 |
Mutual Capacitance (nF/100m) | < 5.6 |
Capacitance Unbalance (pF/100m) | 330 |
Nominal Velocity of Propagation (NVP) | 68% |
Rip cord | Yes |
Drain Wire | Yes |
Max. Pulling Force (KG) | 11.5 |
Min. Bend Radius during Installation 8xD (Overall diameter) at | ‐20°C to ±1°C |
Min. Bend Radius after Installed | 4xD (Overall diameter) |
Installation Temperature Range | 0°C to +50°C |
Operating Temperature Range | ‐20°C to +70°C |
Packing Length (Meters) 305 | ± 1.5 |
D01715-FU3LSGY
Horizontal Cable, Cat-6, F/UTP, 305m, LSZH Sheath, AWG 24, Grey
• 10G BASE-T (Length <50m)
• 1000BASE-T (Gigabit Ethernet)
• 100BASE-T (IEEE 802.3)
• 100BASE-VG-AnyLAN
• 100 Mbps TP-PMD (ANSI X3T9.5)
• 10BASE-T (IEEE 802.3)
• 1.2 Gbps ATM
• 55/155 Mbps ATM
• 4/16 Mbps TOKEN RING (IEEE 802.5)
DME Prolink is the data communication division of ECS global Wire and Cable, that delivers high performance converged datacom solutions. We manufacture complete end-to-end intelligent structured cabling and data center solutions.
Introducing DME Prolink Patch Free FDH. Most ideal solution for connecting premises Fiber optic cables with Telco Fiber Access Network through inbuilt GPON Splitters. Approved by Etisalat. IN STOCK. #GPONSolutions #DMEProlink #FTTx
Electrical Cable Supply Ltd (DME PROLINK),
3135 – 6900 Graybar Road, Richmond,
BC V6W 0A5 Canada
Phone: +1 604 276 9913
Fax: +1 604 276 9915
ECS Global Wire & Cable FZCO (DME PROLINK),
Jebel Ali Free Zone, South Side,
PO Box. 17159, Dubai UAE
Phone: +971 4 811 8000
Fax: +971 4 880 9361